jcb 67C-1, Руководство по обслуживанию

Страница: 18 / 51

01 - Machine
03 - Safety
27 - Maintenance Positions
01 - 12 9813/3450-2 01 - 12
27 - Maintenance Positions
Introduction .................................................... 01-12
Health and Safety .......................................... 01-13
Introduction
Make the machine safe before you start a
maintenance procedure. Unless a maintenance
procedure instructs you differently, you must lower
the excavator arm.
The machine has a cab tilt feature. This feature must
only be used by trained personnel. Refer to: PIL
09-00-00.
Excavator Arm Lowered
1. Park the machine on solid, level ground.
1.1. Release the two track levers.
1.2. Push the hand throttle lever to the idle
position.
2. Lower the dozer. Refer to Figure 2.
3. Lower the excavator arm so the attachment is flat
on the ground. Refer to Figure 2.
Figure 2.
4. Stop the engine.
5. Discharge the hydraulic pressure.
Refer to: PIL 30-00-00.
6. Isolate the controls.
7. Disconnect the battery to prevent accidental
operation of the engine.
Refer to: PIL 33-03-00.