JC MACHINERY & TOOLS INC.
Quality We Trust
___________________________________________________________________
www.jc-tool.com [email protected]
VI.
Using Condition
1. The distance between hot air nozzle and ground should be shown as figure 5
（
We have
adjusted the distance
）
.
2. The distance between hot air nozzle and Drive roller should be shown as figure 6
（
We
have adjusted the distance
）
. You can adjust Hot air nozzle adjusting screw figure 7 if the
distance is not right.
35-42mm
图
6
1mm
(Nozzle adjustment screw)
(Nozzle and driving rubber wheel of interval)
Figure 5
Figure 6
Figure 4
