JC BORDELET LEA 998 CFF, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 22

2.4.5 INSTALLING OR REPLACING GLASS IN DOORS AND FIXED PANELS
Do not use the fireplace with a cracked or broken glass door or fixed glass panel. Contact an
authorized JC Bordelet S.A.S. installer who will order the replacement parts and install them.
Caution: Use only 4 mm (5/32’’) Vitroceram glass doors or fixed panels made by JC Bordelet S.A.S.
and able to resist temperatures that can reach 750
o
C (1382
o
F).
Follow these steps to install or replace the Vitroceram glass in doors of a Lea 998 fireplace:
(N.B. --For a new installation, start at step 5 and always use protective gloves to handle glass.)
1.Loosen the four M4 screws.
2. Remove the clamps holding the glass panel in the frame.
3. Recuperate the rubber insulators.
4. To avoid injury, use protective gloves with extreme care to remove the broken glass.
5. Slide the new glass into the frame and fasten it in place with the clamps and rubber insulators.
6. Install the four M4 screws (new installation) or retighten the four M4 screws when replacing.
NOTE: Never use substitute parts. Use only Bordelet brand parts.
Page 17
1) Loosen 4x M4 screws.
2) Remove the clamps.
3) Recuperate the rubber
insulators.
4) Remove the broken glass
with care.
5) Slide new glass into frame
& fasten it with clamps &
rubber insulators.
6) Retighten the 4 M4 screws.
Installation, removal and replacement
of Vitroceram glass in door.