5-18
©2019 JBT LEKTRO, INC. All rights reserved.
October 2019
LEKTRO 88/89 SERIES - OPERATION MANUAL
•
Vibration can damage battery chargers:
Never store battery chargers in the tractor motor
compartment.
•
Excessive charging can damage the batteries:
Never leave batteries unattended on the
charger for more than 48 hours, in case the charger auto shutoff fails.
•
Battery fluid level may rise during charging:
Never fill the battery cells prior to charging.
See the Battery section of the
Service Manual
for detailed information.
5.7.3
MOTIVE BATTERIES
This section describes the Motive Battery Charger and how to charge the Motive Batteries.
5.7.3.1
MOTIVE BATTERY CHARGER
JBT LEKTRO, Inc. supplies a Motive Battery Charger that is compatible with the Motive
Batteries in LEKTRO 88/89 Series tractors.
The Motive Battery Charger includes the following indicators and controls:
•
Settings buttons (1):
Allow the user to navigate the display and alter some charger
settings. Refer to the manual included with the charger.
•
Volt/Ampere Display (2):
Indicates the amount of battery voltage or current being drawn by
the charger. Higher amperage readings indicate a more discharged battery.
•
USB/Network ports (3):
Do not plug anything in to these ports. They are intended for
troubleshooting and repair purposes only.
•
Status LED (4):
These LED illuminate from left to right to indicate the battery charge level.
When lit, the red LED indicates a problem. All lights turn off when the battery is fully charged.
2
1
3
4
AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - [email protected]
