ENGLISH
OPERATION MANUAL
JB SYSTEMS®
5/36
CONTROL5.2 / MIX5.2 MIXER
REAR PANEL
24.DJ MICRO input:
Used to connect a balanced (stereo jack) or unbalanced (mono
jack) micro to this channel.
25.LINE input:
Used to connect any line level sound source to this channel.
26.PHONO input:
Used to connect a turntable to this channel.
27.PHONO/LINE switch:
Used to select either the phono input(26) or microphone
input(24) on channels 4 and 5.
28.RECORD BUS A:
line level output with the signals from channels 2 to 5. Only the
channels where you selected zone A will be on this output.
Important note:
the tone controls, DJ microphone and talkover function are NOT available on this
output. This means that the DJ can talk as much as he wants; on this output only the music will be
recorded.
29.MASTER A unbalanced output:
Used to connect an amplifier with unbalanced
inputs. The output level can be set by the MASTER A level (18).
30.MASTER A balanced output:
Used to connect an amplifier with balanced inputs.
The output level can be set by the MASTER A level (18).
31.RECORD BUS B:
line level output with the signals from channels 2 to 5. Only the
channels where you selected zone B will be on this output.
Important note:
the tone controls, DJ microphone and talkover function are NOT available on this
output. This means that the DJ can talk as much as he wants; on this output only the music will be
recorded.
32.MASTER B unbalanced output:
Used to connect an amplifier with unbalanced
inputs. The output level can be set by the MASTER B level (16).
33.MASTER B balanced output:
Used to connect an amplifier with balanced inputs.
The output level can be set by the MASTER B level (16).
34.MAINS INPUT:
connect the supplied mains cable to a 230V/50Hz mains outlet.
Before use, inspect the cable to be sure it’s not damaged!
35.MAIN FUSE:
The main fuse protects the mixer. Replace it only with the same
type and value.
ENGLISH
OPERATION MANUAL
JB SYSTEMS®
6/36
CONTROL5.2 / MIX5.2 MIXER
SPECIFICATIONS
Power Supply:
AC 230 V, 50Hz
Fuse:
20mm glass fuse 250V 500mA slow
Frequency response:
20-20.000Hz (+/-2dB)
THD + noise:
<0.1% @ 1kHz, 0dB
S/N Ratio (IHF-A):
>85dB @ 1kHz.
Micro inputs:
1.5mV @ 10k
Ω
Line/CD inputs:
150mV @ 22k
Ω
Phono inputs:
3mV @ 47k
Ω
Record output:
775mV @ 600
Ω
Master A/B output:
1.5V @ 4k7
Ω
unbal.
Master A/B output:
850mV @ 600
Ω
bal.
Talkover:
0dB
-15dB
Tone controls:
+/-12dB @ 10kHz / 1kHz / 100Hz
Headphone:
1V@33
Ω
Dimensions:
483(W) x 134(H) x 130(D) mm
Weight:
2kg