JBL SYNTHESIS SDP-40 Скачать руководство пользователя страница 124

Страница: 124 / 171

MODE ADJUST

JBL

5-26

MUSIC

•

Designed for playback of 5.1-channel dts music sources.

•

The

MUSIC listening mode is not available unless both

side and rear speakers are present.

•

Applies ASA processing to signals sent to the rear speakers.
Refer to the ASA parameter description on page 3-31 for more
information.

•

Recommended for home theaters.

Default

Possible

Parameter

Setting

Settings

LFE MIX

+0.0dB

-10.0 to +0.0dB

OUTPUT LEVELS

Refer to page 5-32

CUSTOM

Refer to page 5-33

Listening mode menu parameter descriptions begin on page 5-34.

Note:

The

MUSIC listening mode can only be

activated with the front panel or remote control
Mode buttons.

@@ @**

MUSIC

MODE ADJUST

•

Listening mode name differs depending on the encoding
present in the input source, the

DECODING parameter

setting, and the speaker setup. Refer to page 5-22 for more
information.

•

Designed for playback of 5.1-channel dts, 5.1-channel matrix-
encoded dts-ES, and 6.1-channel discrete-encoded dts-ES
sources.

•

Decodes 5.1 matrix or 6.1 discrete channels from dts(-ES)
sources. The six main channels are full frequency. The .1
channel, often referred to as LFE information, has a limited
frequency range of 120Hz.

•

Appropriate for 5.1-channel dts, 5.1-channel matrix-encoded
dts-ES, and 6.1-channel discrete-encoded dts-ES sources.

Default

Possible

Parameter

Setting

Settings

LFE MIX

+0.0dB

-10.0 to +0.0dB

DECODING

AUTO

AUTO, ON, OFF

OUTPUT LEVELS

Refer to page 5-32

CUSTOM

Refer to page 5-33

Listening mode menu parameter descriptions begin on page 5-34.

@@@*

MODE ADJUST

Содержание SYNTHESIS SDP-40












































































































































































Результаты поиска

Содержание SYNTHESIS SDP-40

Отзывы:

JBL SYNTHESIS SDP-40, Руководство пользователя, Страница: 124 / 171

Результаты поиска

Содержание SYNTHESIS SDP-40

Отзывы: