background image

Introduction

JBL

viii

NORSK

VIKTIG INFORMASJON OM SIKKERHET

Ta vare på denne veiledningen for senere bruk.

Følg alle anvisningene og advarslene som er angitt på apparatet.

Apparatet skal alltid anvendes med korrekt spenning. Produktbeskrivelsen inneholder
spesifikasjoner for strømkrav. Vær oppmerksom på at det ved ulike driftsspenninger kan
være nødvendig å bruke en annen ledning- og/eller støpseltype.

Apparatet skal ikke monteres i skap uten ventilasjon, eller direkte over varmeproduserende
utstyr, som for eksempel kraftforsterkere. Den maksimale romtemperaturen som står
oppgitt i produktbeskrivelsen, skal overholdes.

Apparatet er utstyrt med ventilasjonsåpninger. For at apparatet skal være pålitelig i bruk
og ikke overopphetes, må disse åpningene ikke blokkeres eller tildekkes. Stikk aldri noe
inn i ventilasjonsåpningene, og pass på at det aldri søles noen form for væske på
apparatet.

Dette apparatet er utstyrt med et jordet støpsel. Dette er en sikkerhetsforanstaltning som
ikke må forandres.

Utgangsplugger fra audioforsterkere skal aldri koples direkte til apparatet.

Unngå brannfare og elektrisk støt ved å sørge for at apparatet ikke utsettes for regn eller
fuktighet og ikke anvendes i nærheten av vann.

Apparatet skal ikke brukes hvis det har blitt utsatt for støt, er skadet eller blitt vått, eller hvis
endringer i ytelsen tyder på at det trenger service.

Dette apparatet skal kun åpnes av fagfolk. Hvis dekselet fjernes, utsettes man for livsfarlig
høyspenning.

Komponenten er merket med denne trekanten, som er en advarsel om at det finnes
uisolert, farlig spenning inne i kabinettet - høy nok til å utgjøre en fare for elektrisk
støt.

Komponenten er merket med denne trekanten, som betyr at den tilhørende
litteraturen inneholder viktige opplysninger om drift og ved

NO

NO

SVENSKA

VIKTIGA SÄKERHETSFÖRESKRIFTER

Spara dessa föreskrifter för framtida bruk.

Följ alla anvisningar och varningar som anges på enheten.

Använd alltid rätt nätspänning. Se tillverkarens bruksanvisningar för information om
effektkrav. Märkväl, att andra matningsspänningar eventuellt kräver att en annan typs
nätsladd och/eller kontakt används.

Installera inte enheten i ett oventilerat stativ, eller direkt ovanför utrustningar som avger
värme, t ex effektförstärkare. Se till att omgivningens temperatur vid drift inte överskrider
det angivna värdet i produktspecifikationen.

Behållaren är försedd med hål och öppningar för ventilering. För att garantera tillförlitlig
funktion och förhindra överhettning får dessa öppningar inte blockeras eller täckas. Inga
föremål får skuffas in genom ventilationshålen. Inga vätskor får spillas på enheten.

Produkten är försedd med en jordad 3-trådskontakt. Detta är en säkerhetsfunktion som
inte får tas ur bruk.

Anslut aldrig audioeffektförstärkarutgångar direkt till någon av enhetens kontakter.

För att undvika elstöt eller brandfara får enheten inte utsättas för regn eller fukt, eller
användas på ställen där den blir våt.

Använd inte enheten om den har fallit i golvet, skadats, blivit våt, eller om dess prestanda
förändrats märkbart, vilket kräver service.

Enheten får öppnas endast av behörig servicepersonal. Farliga spänningar blir tillgängliga
när locken tas bort.

Denna triangel, som visas på din komponent, varnar dig om en oisolerad farlig
spänning inne i enheten. Denna spänning är eventuellt så hög att fara för elstöt
föreligger.

Denna triangel, som visas på din komponent, anger att viktiga  bruksanvisningar
och serviceanvisningar ingår i dokumentationen i fråga.

SE

SE

Содержание SYNTHESIS SDP-40












































































































































































Отзывы: