background image

EN

EN-3

FCC Information (for US 

Customers)

PRODUCT

This product complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions:
1.  This device may not cause harmful interference, and
2.  This device must accept any interference received, 

including interference that may cause undesired 
operation.

IMPORTANT NOTICE: DO NOT MODIFY THIS 

PRODUCT

This product, when installed as indicated in the 
instructions contained in this manual, meets FCC 
requirements. Modification not expressly approved by 
HARMAN may void your authority, granted by the FCC, 
to use the product.

NOTE

This product has been tested and found to comply with 
the limits for a Class B digital device, pursuant to Part 15 
of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation.
This product generates, uses and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there 
is no guarantee that interference will not occur in a 
particular installation. If this product does cause harmful 
interference to radio or television reception, which can 
be determined by turning the product OFF and ON, the 
user is encouraged to try to correct the interference by 
one or more of the following measures:

 

Reorient or relocate the receiving antenna.

 

Increase the separation between the equipment and 
receiver.

 

Connect the product into an outlet on a circuit 
different from that to which the receiver is connected.

 

Consult the local retailer authorized to distribute 
this type of product or an experienced radio/TV 
technician for help.

Safety Information (for European 

Customers)

 

Avoid high temperatures. Allow for sufficient heat 
dispersion when installed in a rack.

 

Handle the power cord carefully. Hold the plug when 
unplugging the cord.

 

Keep the unit free from moisture, water, and dust.

 

Unplug the power cord when not using the unit for 
long periods of time.

 

Do not obstruct the ventilation holes.

 

Do not let foreign objects into the unit.

 

Do not let insecticides, benzene, and thinner come in 
contact with the unit.

 

Never disassemble or modify the unit in any way.

 

Ventilation should not be impeded by covering the 
ventilation openings with items, such as newspapers, 
tablecloths or curtains.

 

Naked flame sources such as lighted candles should 
not be placed on the unit.

 

Observe and follow local regulations regarding 
battery disposal.

 

Do not expose the unit to dripping or splashing 
fluids.

 

Do not place objects filled with liquids, such as vases, 
on the unit.

 

Do not handle the mains cord with wet hands.

 

When the switch is in the OFF position, the equipment 
is not completely switched OFF from MAINS.

 

The equipment shall be installed near the power 
supply so that the power supply is easily accessible.

A Note About Recycling

This product’s packaging materials are recyclable 
and can be reused. Please dispose of any materials in 
accordance with the local recycling regulations.

When discarding the unit, comply with local rules or 
regulations.

Batteries should never be thrown away or incinerated 
but disposed of in accordance with the local 
regulations concerning battery disposal.

This product and the supplied accessories, excluding 
the batteries, constitute the applicable product 
according to the WEEE directive.

Correct Disposal of This Product

These markings indicate that this product should not 
be disposed with other household waste throughout 
the EU.

To prevent possible harm to the environment or 
human health from uncontrolled waste disposal and 
to conserve material resources, this product should be 
recycled responsibly.
To dispose of your product, please use your local return 
and collection systems or contact the retailer where the 
product was purchased.

Pb

Содержание SYNTHESIS SDA-7120




















Отзывы: