EN
EN-9
Network and RS232
The SDA-2200 and SDA-7120 feature a network and
RS232 port that can be used to connect to a local
network, computer or home automation sytem so that
the amplifier can be controlled and monitored remotely.
Various third party systems are available providing
sophisticated control over all of your entertainment
devices. Contact your dealer or installer for details.
For technical details of control protocols please refer to
the SDA-2200 / SDA-7120 RS232/IP control document,
availbale for download at
for
further information.
Note:
By default, network and RS232 control is disabled
in standby to minimise standby power consumption.
To enable network control see “Network and RS322 in
Standby” on page EN-11.
USB
The USB port is used for software updates only. For the
latest software as well as further information, please visit
Trigger IN/OUT
The power state of the SDA-2200 and SDA-7120 can
be controlled by compatible audio/video sources
(such as an JBL Synthesis AVR). In this case, connect the
TRIGGER OUT of the source to the TRIGGER IN of the
SDA-2200 or SDA-7120 using a mono 3.5mm jack lead.
Similarly, the SDA-2200 and SDA-7120 can control the
power state of compatible product (such as another
SDA-2200 or SDA-7120). In this case, connect the
TRIGGER IN of the source to the TRIGGER OUT of the
SDA-2200 or SDA-7120 using a mono 3.5mm jack.
Note:
These leads are not supplied.
NET
RS232
1
2
3
4
NET
Network Router
Home Automation Controller
Home Automation Controller
Contains Transmitter module
FCC ID: APILUXASTR01
IC: 6132A-LUXASTR01
Contains Transmitter module
FCC ID: APILUXABT01
IC: 6132A-LUXABT01
SDA-7120
SDP-55
Control System Connections
