JBL Synthesis
System
Configuration
14
This menu allows you to choose the position and duration of items
displayed on-screen during normal operation, as well as the options of
color or black and white display and conformance to local video format.
Adjusting the position allows you to move the SDP-3 display items to a
location where they will not interfere with any other video overlays or
signals your system may generate.
The STATUS option allows you to choose to have the on-screen display
always off, always on, or on for a two-second duration. Note that if you
choose to have the display "time out", this will not affect the display of
the main menu. Note also that parameter changes will still be performed
when you make adjustments with
▲
or
▼
, even if the display is inactive.
If you choose ALWAYS OFF, you will not be able to use the video
overlay, and even setup will have to be done using the front-panel
display.
COLOR allows you to have the on-screen display presented in mono-
chrome or color. FORMAT allows you to select NTSC, PAL or SECAM
formats. (Note that SECAM format is available only in monochrome).
MENU BACKGROUND allows you to have on-screen controls dis-
played on a solid color background (ON) or directly superimposed on
your video image (OFF).
Press DONE twice to return to the main menu.
Video Input Selection and the
On-Screen Display
When using the Video Monitor
output with the On-Screen Dis-
play, the SDP-3 automatically
puts up a blue or gray back-
ground when no video signal is
present.
DISPLAY ADJUST MENU
FRONT PANEL DISPLAY
ON-SCREEN DISPLAY
ON-SCREEN DISPLAY
STATUS
POSITION
FORMAT
COLOR
MENU BACKGROUND
▲
▼
Adjust with or
2 SECONDS
TOP
NTSC
ENABLED
ON
ALWAYS ON, 2 SECONDS, ALWAYS OFF
TOP, CENTER, BOTTOM
NTSC, PAL, SECAM
ENABLE, DISABLE
ON, OFF
