JBL SA750, Руководство пользователя

Страница: 16 / 22

EN-16
REMOTE CONTROL
SAT AUX
NET
USB
BD
AV
PHONO
PVR GAME
CD
DISP
STB
DIRECT
EQ
OK
RTN
VOL+
MODE
INFO MENU
VOL-
Toggles power between standby and
on.
INFO
Info cycles through the information
displayed on the lower portion of the
front panel display when on NET and
USB inputs.
MENU
Enters the setup menu.
EQ
Toggles Dirac Live EQ on/off.
RTN
Exits the current setup menu.
Toggles the output mute.
VOL
Adjust amplifier volume.
DISP
Cycles through the front panel
display’s brightness options.
DIRECT
Stereo direct on/off. Provides a direct
analog path from the analog inputs to
the audio outputs. Only applicable to
the analog inputs.
OK
Navigate the files and menus on the
screen.
OK selects the highlighted file or
enters the highlighted menu on the
screen – equivalent to ‘Enter’ or
‘Select’ on some remote controls.
PHONO
MM or MC Phono input
AUX
AUX input.
NET
Network (NET) input.
USB
USB input.
AV
AV input.
SAT
SAT input.
PVR
PVR input.
GAME
GAME input.
BD
BD input.
CD
CD input.
STB
STB input.
Toggles power between standby and
on.
MODE
Selects play mode, Normal, Repeat,
Repeat All, Shuffle.
Note:
This function is not available
on all streaming services.
Controls for playback of USB, uPnP
and streaming services.
The remote complies with Part 15 of
the FCC rules
This equipment has been tested and found
to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
a reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiated radio frequency energy and if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet or a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
Notes on batteries:
Incorrect use of batteries can result in hazards
such as leakage and bursting.
Do not mix old and new batteries together.
Do not use non-identical batteries together –
although they may look similar, different batteries
may have different voltages.
Ensure the plus (+) and minus (-) ends of each
battery match the direction indicated in the battery
compartment.
Remove batteries from equipment that is not
going to be used for a month or more.
When disposing of used batteries, please comply
with governmental or local regulations that apply
in your country or area.