JBL Performance Series RS-232 Serial Protocol Definitions
14
6.3.1 Reset Unit
Commands the AV1 to soft reset.
6.3.1.1 Command Packet Description
Application Header:
Command
DC_CMD_RESET
0x10
Data Count
0
0x00
Application Data:
N/A
6.3.1.2 AV1 Response
The AV1 will perform an internal reset. After reset, the AV1 will go through a soft power-up initialization. This
includes transmitting the “Wakeup Notification Packet”. A soft reset does not reinitialize the AV1. Nonvolatile
RAM is maintained.
6.3.2 Restore Defaults
Commands the AV1 to restore the system and effect parameters to the factory defaults.
6.3.2.1 Command Packet Description
Application Header:
Command DC_CMD_RESTORE_DEFAULTS 0x13
Data Count 0 0x00
Application Data:
N/A
6.3.2.2 AV1 Response
The AV1 will reset, or clear, any saved system and effect parameters in Nonvolatile RAM, and restore the
factory default system and effect parameters. After reset, the AV1 will go through a soft power-up
initialization. This includes transmitting the “Wakeup Notification Packet”.
6.3.3 Get Custom Name
Request to AV1 for an effect definition. AV1 will respond with “Custom Name Packet”.
6.3.3.1 Command Packet Description
Application Header:
Command DC_CMD_GET_CUST_NAME 0x2B
Data Count 0 0x00
Application Data:
N/A
6.3.3.2 Data Description
N/A