background image

2

IMPORTANT SAFETY
INSTRUCTIONS

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the 
following measures: 
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected. 

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

To assure continued compliance, any changes or

modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this
equipment. (Example - use only shielded interface cables when
connecting to computer or peripheral devices). 

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: 
(1) This device may not cause harmful interference, and 
(2) This device must accept any interference received, including interference that may

cause undesired operation.

FEDERAL COMMUNICATIONS
COMMISSION INTERFERENCE
STATEMENT

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers) that
produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-
type plug. 
A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles and the point where
they exit from the apparatus.

11. Only use attachments/accessories specified by the
manufacturer.

12. Use only with the cart, stand, tripod, bracket or table
specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.

13. Unplug this apparatus during lightning storms or when unused for
long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.

15. 

Do not expose this apparatus to dripping or splashing and

ensure that no objects filled with liquids, such as vases, are
placed on the apparatus.

16. 

To completely disconnect this apparatus from the AC Mains,

disconnect the power supply cord plug from the AC receptacle.

17.

The mains plug of the power supply cord shall remain readily

operable.

18.

Do not expose batteries to excessive heat such as sunshine,

fire or the like.

WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.

0053CSK - JBL OnAir WEM-1 ENG v6:34199_Control_2_4G_Eng  22/08/08  14:27  Side 2

Содержание On-Air WEM-1









Отзывы: