Controls
5
f
. CODE
See page 10 section 8 “To Change the Password”.
3.Volume control
Press the VOL up/down button to increase or decrease the volume level.
4."MODE" button (3)
Press this button to select Radio, CD, USB/NAND (internal memory), CDC, SIRIUS
or AUX.
5. BD/FN button (4)
In radio mode, press the BD/FN(4) button shortly to select the desired band:
FM1,FM2,FM3, AM1 and AM2.
In SIRIUS mode, press BD/FN (4) button to select the SSR1, and SSR2.
7. How to adjust the clock / time (8)
Press DIS(8) button once to display the time.
a.
Press and hold the DIS (8) button until the time flashes on the display.
b.
Press VOL up to set hour.
c.
Press VOL down to set minutes.
d.
Press the DIS button again quickly to accept the adjusted time.
If no button is pressed within 5 seconds, then the unit automatically accepts the
adjusted time without further intervention from the user.
8. Loudness function (14)
In order to emphasize the bass and the treble at low volume, press the LD (14) button.
To turn off loudness, press the LD button again.
. Manual/Seek tuning buttons (15):
Press this button quickly to activate the Seek
mode. The Seek mode will automatically seek and stop at the next station of sufficient
signal strength. Press and hold tuning buttons for 2 seconds to enter manual tuning
mode. The unit will revert back to Seek mode after 10 seconds without use.
2. Manual Station store:
Select the desired band and tune to a radio station to be
memorized. Choose the preset button memory location span 1-6 (1-10 in Sirius mode)
into which the station is to be stored and press and hold that preset button for 2 seconds.
The station will now be entered into the preset memory. 6 stations can be memorized
on each of the FM1, FM2, FM3, AM1, AM2 bands.
3. A.PS - Auto store function (13)
Press and hold button (13) for approximately 2 seconds until you hear a beep which
confirms the memory function is engaged. The unit will "SEARCH" for six strong
stations and automatically store them on buttons 1 - 6. (FM/AM only)
You can override the preset station on any button by manually setting a new frequency.
Station Tuning
1
Controls
6
4. Scan (11)
In Radio mode, press the SCAN (11) button to scan strong stations.
At the desired station press the "SCAN (11)" button again to stop scanning.
5. Program Memory Scan
Momentarily press A.PS and the unit will scan for stored stations.
Momentarily press it again to stop scanning.
1. Play / Pause (5)
Push to pause playing in CDC USB/NAND, iPod and push again to resume play.
2. Intro Scan (6)
Press this button to hear the first 10 seconds of each track.
Press this button again to restore the player to its normal play mode.
3. Repeat play button (7)
While playing a desired track, press RPT button to play the track repeatedly.
Press RPT button again to return to normal play mode.
4. Random play button (8)
Press RDM button to play all tracks in random sequence.
Press RDM button again to return the player to normal mode.
5
. Press
preset button (9) or (10)
to choose the DISC or folder that you would like
to play. (This button works when you install the CD changer or insert a USB device/iPod
to the radio unit. CDC, USB and iPod is optional.)
6. Track Tuning (15)
Search the tracks on the DISC, USB/ NAND (internal memory), or iPod with the and
buttons. To fast-forward or fast-rewind press and hold the or button continuously.
Listening to the Music
