9
12. VIDEO/AUDIO INPUT
(PLAY) JACKS OF VCR 1
Connect these jacks to the corre-
sponding AUDIO OUTPUT jacks of
your VCR.
13. VIDEO/AUDIO OUTPUT
(REC) JACKS OF VCR 1
Connect these jacks to the corre-
sponding INPUT jacks of a VCR.
VIDEO OUTPUT jack: Connect this
jack to the VIDEO INPUT jack of the
VCR. AUDIO REC jack: Connect
these jacks to the AUDIO INPUT
jacks of the VCR.
14. VIDEO/AUDIO INPUT
(PLAY) JACKS OF VCR 2
Connect these jacks to the corre-
sponding OUTPUT jacks of your VCR
or VDP.
15. VIDEO MONITOR JACK
Connect this jack to the VIDEO
INPUT jack of a TV/MONITOR.
16. REMOTE CONTROL
OUT JACK
Connect this jack to the “REMOTE IN”
jack on a Harman Kardon component.
Use one of the accessory mini-plug
cables.
You can control some Harman Kardon
components in your system using the
JSR655 remote commander.
17. MULTI-ROOM REMOTE
IN JACK
Connect a remote IR sensor to this
jack. You can operate the unit by
remote commander through the
adapter. It is convenient when the unit
is located in a separate room. (See
page 10)
18. FRONT, CENTER,
REAR PRE OUT AND MAIN
IN JACKS
FRONT PRE OUT
When a separate power amplifier is
used to drive the front speakers, con-
nect the power amplifier input to
these jacks.
FRONT MAIN IN
When a separate pre-amplifier is con-
nected and this unit is used as a
power amplifier, connect the pre-
amplifier output to these jacks.
NOTE:
When you do not use the
PRE OUT and MAIN IN separately,
always connect the PRE OUT and
MAIN IN jacks with a jumper plug.
CENTER PRE OUT
When a separate power amplifier is
used to drive the center speaker,
connect the power amplifier input to
these jacks.
REAR PRE OUT
When a separate power amplifier is
used to drive the rear speaker, con-
nect the power amplifier input to
these jacks.
19. 1/ 2 SPEAKER
TERMINALS
Connect the main left (L) and right
(R) speakers to the corresponding A
and B speaker terminals. Make sure
that the positive (+) and negative (-)
terminals on the speaker are con-
nected to the corresponding termi-
nals on the receiver.
19A. CENTER SPEAKER
TERMINALS
Connect the corresponding positive
and negative terminals on the center
speaker to the positive (+) and nega-
tive (-) terminals on the receiver.
20. REAR SPEAKER
TERMINALS
Connect rear speakers to the corre-
sponding terminals. When you con-
nect the rear speakers, connect both
L and R speakers.
21. AC INPUT CORD
Plug this cord in the AC outlet on
a wall.
22. SUBWOOFER OUT
When a separate power amplifier is
used to drive a subwoofer, connect
the power amplifier inputs to these
jacks.
JSR655om (a) qx 7/28/98 9:54 AM Page 11