6
201401/IvxIM_v2.2
JBL Intellivox Installation Manual
A standard option applicable to all models is the position
within the housing of the electronics module, which may
either be at the top or bottom of the housing. The position
is relevant to the installation procedure as the “acoustic
centre” (see fig 2) of the loudspeaker array will be different
in the two cases. It is not possible for the electronics
module’s position to be changed after production.
A further option available to special order is for the
electronics module to be mounted at the rear of the unit.
This results in a loudspeaker with different dimensions from
the standard models, requiring a different mounting
procedure. Note that this manual is NOT applicable to these
versions; please contact JBL for more information.
Reference point for
acoustical mounting
height
DC115
amp at bottom
DC115
amp at top
Reference point for
acoustical mounting
height
WHAT’S IN THE PACKAGING
In addition to the loudspeaker itself, each unit is shipped
with the following items:
• Installation manual (this document)
• Datasheet specific to the model
• Box containing:
A
B
I
C
J
G
D
E
F
H
REF
ITEM
QTY
USE
A
Mounting brackets
2 or 3*
Speaker mounting
B
Set of 30 mm hex-head screws with washers and wall plugs
4 or 6*
Mounting bracket fixings
(wall)
C
Female IEC mains connector
1
AC input
D
6-pole female WAGO connector, with cover
1
Mating connector
for audio
E
5-pole female WAGO connector, with cover
1
Mating connector for
RS-485 control port
F, G
Set of PVC inserts for WAGO connectors, with wire insertion tool
1
WAGO connector wiring
H
Set of M4 x 10 round-head screws with star retaining washers
4 or 8*
Grille retaining screws
I
M5 x 12 pan-head screws with shakeproof washers
8 or 12*
Mounting bracket fixings
(loudspeaker)
J
Caution Label
1
Mains cable labeling
* depending on model
fig.2
fig.3 - Box contents
The mounting brackets, screws and wall plugs as well as the connector set are packed together in a
separate box enclosed in the main packaging.
