15
source
U S I N G T U N E R P R E S E T S
Presetting Radio Stations
You can preset up to 40 of your favorite AM and FM stations, in any
combination, in the tuner memory for easy recall.
Note:
You must press
MEMORY
to memorize
a station while the Memory indicator
appears in the display (approximately
4 seconds), otherwise the station will
not be memorized.
7. Repeat steps 2 to 6 to enter up to
40 stations in the tuner memory.
Recalling Preset Stations
1. Press
STANDBY
on the remote
control to turn the system 'ON' and,
if necessary, press
FM/AM
to select
the Tuner function.
2. Press either
PRESET/SKIP or
PRESET/SKIP
on the remote to
select the desired preset memory
number.
Note:
You may also use the number
keys on the remote control to go
directly to one of the preset memory
stations. To select preset stations 1
through 9, press the number key. To
select preset station numbers higher
than 9 press the ">10" key one or more
times followed by the appropriate
number key, for example:
To Select Station
Press These
Number:
Keys:
10
>10 and 0
15
>10 and 5
21
>10 twice and
then 1
34
>10 three times
and then 4
40
>10 four times
and then 0
Changing Preset Stations
To change any of the preset stations
simply tune to the new station you
wish to memorize and enter it in the
preset memory number you wish to
change. The new station will be
memorized and the previous station
will be erased.
1. Press
STANDBY
on the remote
control to turn the system On.
Make sure that the Main Power
Switch on the back is set to the "1"
(on) position.
2. Press either
FM/AM
on the remote
control or
SOURCE
on the front
panel, repeatedly to select the
Tuner and the desired radio band,
AM or FM.
3. Tune to the first station you wish to
preset.
• Manual Tuning - repeatedly press
/
TUNING/SEARCH
on the
remote control until the desired
frequency appears on the display.
(Note: You must use manual tuning if
your are trying to tune to a weak
station.)
• Automatic Tuning - press and hold
/
TUNING/SEARCH
on the
remote control until the display
begins to scan up or down, then
release the button. The tuner will
stop at the first strong station it finds.
Repeat this process until it stops at
your desired station.
4. When the desired station appears in
the display (Example: FM 103.5 MHz)
press
MEMORY
on the remote
control. The idicator "
P 0 0
" will
appear in the display. Use the
number keys to enter a desired
preset (between 01 and 40).
5. Press
MEMORY
on the remote
control again to enter the station
into memory. The preset station
number will disappear and the
station is memorized.
6. To enter the next station in memory
follow steps 2 and 3 to tune the
desired station and press
MEMORY
on the remote control. Then press
either
PRESET/SKIP or
PRESET/SKIP
on the remote control
or the desired NUMBER button
(how to select see the note on the
right) to select another preset
memory number, and press
MEMORY
again to enter that station
in the selected preset memory
number.
standby
FM/AM
number buttons
preset
and
search
and
memory
