background image

5    

JBL Professional Control 25AV-LS

PAINTING THE CONTROL 25AV-LS

The polystyrene speaker enclosure of the Control 25AV-
LS can be painted to match almost any decor. 

1.  Remove  the  grille  and  mask  the  woofer,  tweeter,  & 
ports  on  the  front,  and  the  wire  terminals  on  the  back, 
being careful that no tape comes in direct contact with the 
drivers. 

2.  Clean  the  enclosures  with  a  light  solvent  such  as 
mineral  spirits  by  rubbing  the  components  with  a  lightly 
dampened cloth. Do not, however, use abrasives such as 
sandpaper or steel wool on the enclosures. Nor should you 
use gasoline kerosene, acetone, MEK, paint thinner, harsh 
detergents or other chemicals. Use of these cleaners may 
result in permanent damage to the enclosures.

3.  After  cleaning,  apply  two  or  more  thin  coats  of  either 
latex  or  oil-based  paints.  Latex  paints  will  adhere  better 
if an oil-based primer is used first. Application can be by 
rolling, brushing, or spraying. The grilles require masking 
of the logo plug, then spray painting. If the grill is rolled or 
brush painted, the mesh may become clogged with paint, 
and poor sound quality may result.

The  InvisiBall  mount  may  also  be  painted,  but  because 
it  is  metal,  latex  paints  will  not  adhere  as  well  as  other 
finishes.

MAINTENANCE 

No maintenance is required when assembled in accordance 
with the instructions and wiring guidelines described in this 
manual.  The cabinet on the Control 25AV-LS is designed 
to be weather resistant but it is 

NOT WEATHERPROOF

CONTACTING JBL PROFESSIONAL

These  products  are  designed  and  backed  by  JBL 
Professional,  the  world  leader  in  professional  sound 
reinforcement.    For  complete  warranty  information,  to 
order replacement parts or to ask for clarifications to this 
manual, contact JBL Professional.

Within the United States:

Applications Department, JBL Professional
8400 Balboa Blvd., PO Box 2200
Northridge, CA 91329 USA

In the USA you may call Monday through Friday 8:00am to 
5:00pm Pacific Coast Time (800) 894-8850.

Outside the USA:

Contact the JBL Professional Distributor in your country.

A  list  of  JBL  Professional  Distributors  and  US  Service 
Centers can be obtained from the JBL Professional website 
at: 

www.jblpro.com

MAINTENENCE & CONTACTING JBL

Содержание Control 25AV-LS









Отзывы: