EN
Pg 2 of 11
4329P OM | Part No: 950-0628-001 | Rev 1.0 20221201
© 2023 HARMAN International Industries. Incorporated All rights reserved.
3. Back Panel Overview
4329P
POWERED STUDIO MONITOR
有源演播室监听音箱
Manufacturer
制造商
Harman International Industries, Incorporated
8500 Balboa Blvd, Northridge CA 91329 USA
Designed and engineering in USA
Made in China
中国制造
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not ause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Contains Transmitter Module FCC ID: UA9601
Contains Transmitter Module IC: 9129A-601
responsible for compliance could void the user’s authority to operate the equipment.
4329P
POWERED STUDIO MONITOR
有源演播室监听音箱
Primary
Secondary
A
H
B
I
C
J
D
K
E
L
F
M
N
O
S
G
R
P
Q
A
XLR / ¼" Balanced Input Sensitivity Selection – Select
either; -10dB (High sensitivity mode) or +4dB (Low
sensitivity / protects input front-end from overload)
K
Bass Contour switch:
For boundary compensation adjustment – 0dB or -3dB
selectable
B
Left & Right XLR / ¼" Balanced Inputs
L
Sub-Woofer Output: When utilized, an 80Hz high-pass
filter is activated for system
C
Ethernet: Connect to available port on router for wired
streaming
M
Primary Speaker Digital Link: To create wired connection
between Primary and Secondary speaker via CAT5e or
higher cable (Max length 20' / 6m)
D
USB-A + Service button: For service / firmware updates
ONLY (Not for Audio or USB Charging)
N
L/R Assign Selector: Select L or R depending on the
intended listening position for the Primary speaker
E
Reset: Factory Reset – press and hold until lights on
the front panel begin to flash
O
Primary Speaker Main Power switch: I = On / O = Off
F
Primary Speaker Sync Button: Use to connect
wirelessly to Secondary speaker
P
Secondary Speaker Sync Button: Use to connect
wirelessly to Primary speaker
G
Primary Speaker IEC Power connection – a universal
power supply is incorporated allowing these to be used
domestically and internationally.
Q
Secondary Speaker Digital Link: To create wired
connection between Primary and Secondary speaker via
CAT5e or higher cable (Max length 6m)
H
3.5mm analog stereo input
R
Secondary Speaker IEC Power connection - a universal
power supply is incorporated allowing these to be used
domestically and internationally.
I
Toslink / Optical digital input
S
Secondary Speaker Main Power switch: I = On / O = Off
J
USB-B Digital Direct PCM input
