jbc PHSE-1A, Инструкция по эксплуатации

Страница: 5 / 20

5
After loosening the SP guide knobs, push the
PCB against the SP guide and lift out.
Place large PCBs on
the 4 rubber caps
Push the PCB against the SP guide, position it
and tighten the SP guide knobs.
Changing PCBs of the same batch
The support lets you place PCBs of the same batch so as to always heat the same area.
Use the sliding guides to change the PCBs.
Removing the PCB Placing another PCB
Reworking large PCBs
www.jbctools.com