jbc PHSE-1A, Инструкция по эксплуатации

Страница: 8 / 20

8
For repetitive jobs we recommend running profiles without the Thermocouple (TC). In order to do
so, the Teach profile mode has to be executed before running any profile. It can be executed from
the Work mode menu if the Profiles mode is selected. Once the profile has been run to the end, the
system has all the process data which you can save.
Once it is saved, you can run this profile without connecting the Thermocouple (TC). The heating
process will be the same as long as the same working conditions are respected.
The profiles which already have the data from the Teach profile are marked with this symbol
These profiles can be run either with or without the Thermocouples. It can be chosen from the
Profiles mode work screen:
Teach profile
Select Profile mode from the Work mode menu. In this mode the heater unit regulates the
temperature of the TC1 thermocouple according to the selected profile as long as the other TCs do
not reach the control/protection temperature limit.
Profiles mode
14:15
20
º C
TC1
Stop
20
º C
TC2
PROFILE1
200
100
20
º C
TC3
20
º C
TC4