![background image](http://html1.mh-extra.com/html/jbc/dis-d/dis-d_manual_3778861014.webp)
14
Before carrying out maintenance or storage, always
allow the equipment to cool and unplug the stand
from the station and the tool
- Clean the station’s screen with a glass cleaner or a
damp cloth.
- Use a damp cloth to clean the casing, the stand
and the tool. Alcohol can only be used to clean the
metal parts.
- Check periodically that the metal parts of the tool/
stand are clean so that the station can detect when
the tool is in the stand.
- Maintain tip surface clean and tinned prior to storage in order to avoid tip oxidation. Rusty and
dirty surfaces reduce heat transfer to the solder joint.
- Periodically check all cable connections.
- Replace the fuse if it is blown according to the following guidelines:
Remove the fuse by pulling the black cap.
If necessary use a tool to lever it off.
Press the new fuse into the holder and
replace it in the station.
Maintenance
Fuse
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Clean periodically
Содержание DIS-D
Страница 1: ...Premium Desoldering station with Electric Pump Ref DIS D English www jbctools com ...
Страница 16: ...16 ...
Страница 17: ...17 www jbctools com ...
Страница 19: ...19 www jbctools com ...