jbc DIS-D, Руководство пользователя

Страница: 11 / 20

11
Tip Care
- The largest rod that fits in the tip hole should
periodically be passed through in order to clean
the intake tube. You can use any one supplied
with the CL9885 Tip Cleaning Stand.
- Important: DO NOT press the pushbutton
vacuum pump while tinning the desoldering tip,
as the fumes given off by the flux would quickly
soil the ducts and filter of the air circuit.
Tin Deposit Maintenance
Tip Care
Then its spiral must be removed to clean the inner
part of the deposit with the provided stick.
- The condition of the filter and internal joint must
be checked and replaced if dirty or damaged.
For this, the lid needs to be unscrewed with the
DR560 in vertical position.
The deposit needs to be inserted with spiral filter put
into place, positioned between the 2 lines marked
on the tin deposit. Then the whole must be closed
by screwing the lid 1.
Check filter
Check
internal joint
2
3
1
www.jbctools.com