www.jbctools.com
6
7
Wiping:
Use the slots to wipe off any remaining
particles.
Tip Cleaning System
Tapping:
Tap gently to eliminate excess solder.
Sponge
Ref. S0354
The least harmful cleaning method.
Keep the sponge damp with distilled water to prevent
tip wear.
Brass Wool
Ref. CL6210
Very effective cleaning method.
Leaves a small layer of solder on the tip preventing
oxidation between cleaning and rewetting.
Select the option that best suits your tip cleaning needs.
More options for the splashguard (not supplied):
Inox Wool
Ref. CL6205
An alternative to
Brass Wool.
Metal Brush
Ref. CL6220
When used carefully,
it provides a more
thorough cleaning.
Splashguard
Tip Wipe
Changing cartridge
Compatible cartridges
CP station works with C120 cartridge range. Check the model that best adapts to your soldering needs
in
www.jbctools.com
Turn the station off and follow these guidelines for a safe cartridge change:
Important:
Insert the cartridge to the mark
for a proper connection.
Mark
1. Removing
2. Inserting
Loosen the screw to remove the cartridge.
Use a flat nosed pliers if the cartridge is hot.
ø0,7
1,5mm
ø 0,2
5mm
6m m
C120-009
C120-010
C120-004
C120-001
C120-005
C120-009
C120-010
3. Aligning
Use a flat nosed pliers for a correct alignment.
Alignment
Important:
Tighten the screw. This is
necessary for the tool to function.
Be careful not to over-tighten the screw.
4. Fixing
