jbc CLMU-PA, Инструкция по эксплуатации

Страница: 4 / 12

444
Operation
For best cleaning results, we recommend placing the tip between the two brushes for just 1
second. Longer exposure time would lead to dewetting of tip surface causing oxidation.
If excessive pressure is applied with the tool against any of the brushes, the cleaner stops
automatically in order to protect the motors. Putting the tool out of the sensor detection area
automatically reactivates the cleaner.
Sensor
mode
Continuous
mode
On / Off
The CLMU-PA is automatically switched off if the splashguard is opened during operation.
Led status
- White: Off
- Blue: Standby
- Green: Brushes activated
- Blinking Red: Brushes jammed