jbc B-IRON 500, Инструкция по эксплуатации

Страница: 7 / 28

5. Turning on the Portable Display
Turn on the display by holding
down the power button and then
open the B·IRON app*:
* Note:
The app can also be downloaded to your
own devices. To know how, see section “Installing
and Updating the B·IRON App”.
Power Button
3 1
4
2
6. Cartridge Insertion and Charging
Place the tool over a cartridge
and press the tool down to insert
the cartridge (1). To release the
tool with the cartridge from the
extractor, lift the tool upward (2). Make sure that the cartridge is
appropriately inserted* into the
tool by gently pressing the tip
against the holes on the sides
of the cartridge exchanger (3).
*Important: Cartridges must
be inserted up to the mark for
a proper connection.
Place the tool on the tool charger
(4) to charge it. A beep will sound
to confi rm that the tool is properly
placed and charging.
The sound can be turned up,
down or off using the buttons on
the display.
Note: Charge the tool
completely before using it for
the first time. It will take aprox.:
-30 min for B·IRON 100 TOOL
-60 min for B·IRON 500 TOOL
-30 min for B·NANO TOOL
-40 min for B·TWEEZERS TOOL
For more information on how to change cartridges and the use of the cartridge exchanger, see section
“Cartridge Exchanger and Cartridge Holder”.
Inserting Fixing Charging
Mark
7
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm