jbc 5120100, Инструкция по эксплуатации

Страница: 2 / 20

1
ENGLISH
We appreciate the trust you have shown in JBC by purchasing this station.
It has been manufactured with the highest standards of quality to ensure reliable
service. Before starting up the apparatus, we recommend you read these instructions
carefully.
FEATURES
Station composition
RA 5150 EU: Ref. 5150200
RA 5150 UK: Ref. 5150201
RA 5150 USA: Ref. 5150100
- Control Unit 230V Ref. 5330200
- Control Unit 120V Ref. 5330100
- Desoldering iron 75W Ref. 3040000
- Soldering iron 50W Ref. 3010000
- Soldering iron stand US 1000 Ref. 0290100
- Desold. iron stand UD 1500 Ref. 0290150
- External desoldering air filter Ref. 0781184
- Set of tools and
replacement filters
Ref. 0781181
- Tip removal device Ref. 0114108
- Instructions manual Ref. 0965405
Weight of packaged equipment: 3,8 kg
Besides the soldering and desoldering irons
supplied with this station, the Control Unit will
a l s o t a k e t h e 2 0 W R e f . 3 0 0 0 0 0 0 , 6 0 W
Ref. 3020000 with solder feed and 70 W
Ref. 3070000 soldering irons.
Control Unit technical data
1. Station maximum power: 175W
2. Safety transformer with mains separator:
230V/24V 50Hz - 120V/24V 60Hz
3. Temperature range: from 100 till 400°C.
4. Programmed temperature accurate: ± 5%.
5. Green LED temperature adjustment optical
control.
6. Abides the CE standards for electrical
security, electromagnetical compatibility and
antistatic protection.
7. Equipotential connector and the tool tip are
connected to station mains ground supply for
ESD protection.
Temperature adjustment for special tips
The temperatures on the dial are set for the 75W
desoldering iron with tip 20 DE and for the 50W
soldering iron of with tip R-10 D, which are included
in the equipment. A change of tip or soldering
iron model could involve a variation of ± 7% in the
set temperature.
Spare filters
Ref.0781046
External desoldering air filter
Ref.0781184
% Vacuum indicator
and obstruction degree
in the suction circuit
Desoldering
temperature selection
The desoldering iron is connected to the station following the below procedure:
The cable connection of the desoldering iron is connected to the desoldering connector
of the station and the vacuum hose is connected to the external desoldering air filter,
which is connected to the vacuum connection of the station. Very important, it is
essential to connect the mentioned filter to prevent from damaging the vacuum pump.
Soldering
temperature selection
Aspiration inlet
Desoldering connector
Soldering connector
Equipotential terminal