JB Systems XO 2.4 Mk2, Руководство по эксплуатации

Страница: 4 / 8

ENGLISH OPERATION MANUAL
JB SYSTEMS
®
2/5 XO2.4 Mk2
•
To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
•
This unit is for indoor use only.
•
Don’t place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be
placed on this appliance. Electric shock or malfunction may result. If a foreign object enters the unit,
immediately disconnect the mains power.
•
No naked flame sources, such as lighted candles, should be placed on the appliance.
•
Don’t cover any ventilation openings as this may result in overheating.
•
Prevent use in dusty environments and clean the unit regularly.
•
Keep the unit away from children.
•
Inexperienced persons should not operate this device.
•
Maximum save ambient temperature is 40
°C. Don’t use this unit at higher ambient temperatures.
•
Minimum distances around the apparatus for sufficient ventilation is 5cm.
•
Always unplug the unit when it is not used for a longer time or before you start servicing.
•
The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
•
Check that the available voltage is not higher than the one stated on the rear panel of the unit.
•
The socket inlet shall remain operable for disconnection from the mains.
•
The power cord should always be in perfect condition. Switch the unit immediately off when the power cord
is squashed or damaged.
•
Never let the power-cord come into contact with other cables!
•
When the power switch is in OFF position, this unit is not completely disconnected from the mains!
•
This CLASS I appliance must be connected to MAINS socket outlet with a protective earth connection in
order comply with safety regulations.
•
In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user
serviceable parts inside.
•
Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same
type and electrical specifications!
•
In the event of serious operating problems, stop using the appliance and contact your dealer immediately.
•
Please use the original packing when the device is to be transported.
•
Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
INSTALLATION GUIDELINES:
•
Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity.
•
Placing and using the unit for long periods near heat-generating sources such as amplifiers, spotlights, etc.
will affect its performance and may even damage the unit.
•
The unit can be mounted in 19-inch racks. Attach the unit using the 4 screw holes on the front panel. Be
sure to use screws of the appropriate size. (screws not provided) Take care to minimize shocks and
vibrations during transport.
•
When installed in a booth or flight case, please make sure to have good ventilation to improve heat
evacuation of the unit.
•
To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance.
CLEANING THE APPLIANCE:
Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside the unit. Do not
use volatile liquids such as benzene or thinner which will damage the unit.