ENGLISH
USER MANUAL
JB SYSTEMS
®
1/10
SUNBAR COMBI
OPERATION MANUAL
Thank you for buying this JB SYSTEMS
®
product. To take full advantage of all possibilities and for your own
safety, please read these operating instructions very carefully before you start using this unit.
FEATURES
•
This 2in1 bar combines narrow white beams and wide color beams in one single unit!
•
7x 3W warm white LEDs with individual pixel c 7x 9W RGB Leds.
•
The perfect tool for DJs and clubs but also for use one stage!
•
Different control options:
•
Full DMX-control via 1, 4, 11, 12 or 17 channels.
•
Many different integrated automatic programs.
•
Sound activated mode with internal microphone.
•
Master/slave mode for bigger setups
•
Prepared for wireless DMX: just plug-in an optional WTR-DMX DONGLE ! (Briteq
®
code: 4645)
BEFORE USE
•
Before you start using this unit, please check
if there’s no transportation damage. Should there be any, do
not use the device and consult your dealer first.
•
Important:
This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
•
Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check if the packing contains the following items:
•
Operating instructions
•
SUNBAR COMBI
•
Mains cable
SAFETY INSTRUCTIONS:
CAUTION:
To reduce the risk of electric shock, do not remove
the top cover. No user-serviceable parts inside. Refer servicing
to qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the
use or the presence of un-
insulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence
of important operation and maintenance (servicing) instructions in the literature accompanying
this appliance.
This symbol means: indoor use only.
This symbol means: Read instructions.
This symbol determines: the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than 0.1 meter.
The device is not suitable for direct mounting on normally flammable surfaces. (suitable only for
mounting on non-combustible surfaces)