ENGLISH
USER MANUAL
JB SYSTEMS
®
9/10
SUNBAR COMBI
193-215
Pattern 2
216-238
Pattern 3
239-255
Pattern 4
CH 15
000-243
Speed (slow to fast)
Color Pattern Speed
244-255
Music controlled
CH 16
000-009
Black-Out
WHITE Beam
Pattern Selection
010-022
Pattern 1
023-035
Pattern 2
036-048
Pattern 3
049-061
Pattern 4
062-074
Pattern 5
075-087
Pattern 6
088-100
Pattern 7
101-113
Pattern 8
114-126
Pattern 9
127-139
Pattern 10
140-152
Pattern 11
153-165
Pattern 12
166-178
Pattern 13
179-191
Pattern 14
192-204
Pattern 15
205-217
Pattern 16
218-230
Pattern 17
231-255
Random Pattern
CH 17
000-243
Speed (slow to fast)
Beam Pattern Speed
244-255
Music controlled
Extra functions in the menu
•
Press the [MENU] button until the display shows [SYS].
•
Press the [ENTER] button if you want to enter this part of the menu with extra options.
•
Use the [UP/DOWN] buttons to browse the extra functions in this System menu
o
[rSEt]
= Factory Reset
. This function can be used to reset all the settings of the unit to the
original factory settings
▪
Just press the [ENTER] button to reset the unit.
o
[binU] = Beam inversion
With this option you can invert the flow of the beam effects.
▪
Press the [ENTER] button to enter the option settings
▪
Use the [UP / DOWN] button to select the desired mode:
•
[on] = inverted flow
•
[oFF] = normal flow.
MAINTENANCE
•
Make sure the area below the installation place is free from unwanted persons during servicing.
•
Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
•
All screws used for installing the device and any of its parts should be tightly fastened and may not be
corroded.
•
Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any
deformation.
•
When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
•
The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
•
In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.