ENGLISH
OPERATION MANUAL
JB SYSTEMS
1/14
LED FIRE BASKET
Thank you for buying this JB Systems
®
product. To take full advantage of all possibilities and for your own safety, please
read these operating instructions very carefully before you start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and national
guidelines. Conformity has been established and the relevant statements and documents have been deposited by the
manufacturer.
This device has been designed to produce decorative effect lighting and is used in light show systems.
Looks like a real flame
Uses 40 LEDs (blue + orange) to achieve very realistic colors
Very low power consumption
No heat dissipation
Flame height: 22 cm
Size only 16 x 16 x 12 cm
Can be used for all kinds of decoration
BEFORE USE
Before you start using this unit, please check if there’s no transportation damage. Should there be any, do not use the
device and consult your dealer first.
Important:
This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to
strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandeling are not
subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by
disregarding this user manual.
Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual.
Check the contents:
Check that the carton contains the following items:
Operating instructions
LED Fire Basket unit
SAFETY INSTRUCTIONS:
CAUTION:
To reduce the risk of electric shock, do not remove the top cover. No user-
serviceable parts inside. Refer servicing to qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the
presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of important
operation and maintenance (servicing) instructions in the literature accompanying this appliance.
This symbol means: indoor use only.
This symbol means: Read instructions
.
To protect the environment, please try to recycle the packing material as much as possible.
A new light effect sometimes causes some unwanted smoke and/or smell. This is normal and disappears after some
minutes.
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it
into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even
cause damages.
This unit is for indoor use only.
Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign object
enters the unit, immediately disconnect the mains power.
Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids
Don’t cover any ventilation openings as this may result in overheating.
CAUT ION
ENGLISH
OPERATION MANUAL
JB SYSTEMS
2/14
LED FIRE BASKET
Prevent use in dusty environments and clean the unit regularly.
Keep the unit away from children.
Maximum save ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.
Check that the available voltage is not higher than the one stated on the rear panel of the unit.
The power cord should always be in perfect condition: switch the unit immediately off when the power cord is
squashed or damaged.
Never let the power-cord come into contact with other cables!
This fixture must be earthed to in order comply with safety regulations.
Don’t connect the unit to any dimmer pack.
In order to prevent electric shock, do not open the cover. Apart from the lamp and mains fuse there are no user
serviceable parts inside.
Never
repair a fuse or bypass the fuse holder.
Always
replace a damaged fuse with a fuse of the same type and
electricalspecifications!
In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
The housing must be replaced if it is visibly damaged.
Please use the original packing when the device is to be transported.
Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important:
Don’t use the effect in the presence of persons suffering from epilepsy.
DESCRIPTION:
1.
Silk Cloth
2.
Mains cable 230Vac
OPERATING INSTRUCTIONS
Once connected to the mains the device starts running.
Regular breaks during operation are essential to maximize the life of this device as it is
not designed for continual use.
Do not switch the unit on and off in short time intervals as this reduces the lamp life.
Always unplug the unit when it is not used for a longer time or before replacing the bulb or start servicing.
In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
Important:
Don’t use the effect in the presence of persons suffering from epilepsy.
SPECIFICATIONS
Mains Input:
AC 230V, 50Hz
Fuse:
250V 1A slow blow (20mm glass)
Lamp:
40 LEDs (blue + orange)
Size (WxDxH):
165 x 165 x 120 mm
Weight:
1,1kg
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com