JB Systems INTRUDER, Руководство по эксплуатации, Страница: 9 / 16

ENGLISH USER MANUAL
JB SYSTEMS ® 7/11 INTRUDER
Information > Time
Used to check the working hours of the fixture.
•
Press the MENU button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the ENTER button
•
Current Time: Shows the working time since power on
•
Total Time: Shows the total on time
•
Once the correct option shows on the display, press the ENTER button to confirm.
Information > Error
Used to check faulty sensors.
•
Press the MENU button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the ENTER button to view if errors are present.
Information > Temperature
Used to the head temperature sensor.
•
Press the MENU button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the ENTER button to view the head temperature.
Information > Software Version
Shows the current firmware version in the projector.
•
Press the MENU button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the ENTER button: the display shows the firmware versions of the main board
Factory
Used to adjust the factory calibration
•
Press the MENU button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the ENTER button
•
Press the ▲/▼ buttons to enter the password:122
•
Press the ENTER button to confirm
•
Use
the ▲/▼ buttons, to navigate, the values can now be changed
Reset > All Reset
Used to reset all the functions of the projector.
•
Press the MENU button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the ENTER button: select the All Reset option
•
Off: No reset is performed
•
Run: Run the reset function
Reset > Factory
Used to reset all the settings of the projector to factory settings.
•
Press the MENU button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the ENTER button: select the All Reset option
•
Off: No reset is performed
•
Run: reset the device