JB Systems INTRUDER, Руководство по эксплуатации, Страница: 7 / 16

ENGLISH USER MANUAL
JB SYSTEMS ® 5/11 INTRUDER
DMX Address
Used to set the desired DMX-address.
•
Press the MENU button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the ENTER button: the values can be changed
•
Use ▲/▼ buttons to select the desired DMX512 address.
•
Once the correct address shows on the display, press the ENTER button to confirm.
Fixture > DMX Mode
Used to set the desired channel mode.
•
Press the MENU button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the ENTER button: the values can be changed
•
Use ▲/▼ buttons to select the desired mode:
•
Easy: A very compact 7CH mode.
•
HSI: Basic HSI controlled mode
•
STD: Standard 8-bit mode
•
EXT: Extended 16-bit mode
•
Once the correct option shows on the display, press the ENTER button to confirm.
Fixture > Run Mode
Used to set the desired run mode.
•
Press the MENU button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the ENTER button: the values can be changed
•
Use ▲/▼ buttons to select the desired mode:
•
DMX: enables the control through DMX.
•
Manual: set the wash to a fixed position.
•
Sound: activates sound controlled effects
•
Master: activates master mode
•
Once the correct option shows on the display, press the ENTER button to confirm.
Fixture > Pan Invert
Used to select if the PAN movements are inverted or not.
•
Press the MENU button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the ENTER button: the values can be changed
•
Use ▲/▼ buttons to toggle between No and Yes.
•
Press the ENTER button to confirm.
Fixture > Tilt Invert
Used to select if the TILT movements are inverted or not.
•
Press the MENU button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the ENTER button: the values can be changed
•
Use ▲/▼ buttons to toggle between No and Yes.
•
Press the ENTER button to confirm.
Fixture > No signal
Used to set how the projector reacts when the DMX-signal disappears.
•
Press the MENU button to access the different functions in the menu.
•
Press the ▲/▼ buttons until the desired function is showing on the display.
•
Press the ENTER button: the values can be changed
•
Use ▲/▼ buttons to select the desired mode:
•
Freeze: output based on the last valid DMX-signal is kept on the projector.
•
BO: output turns black while no DMX is detected.
•
Once the correct option shows on the display, press the ENTER button to confirm.
Note: as soon as the input detects a DMX-signal, blackout, freeze or audio mode will be cancelled.