JB-Lighting P18 MK2 Wash HP, Руководство по эксплуатации

Страница: 33 / 40

- 33 -
P18 MK2 WasH
7.2 Changing gobos
To open the device (from the right side)
place the spotlight on a firm base as shown
in the picture, the display (1) facing you,
the tilt lock (2) is on the right side and the
spotlight head facing away from you (3)
(Or look through the grille into the spotlight
from behind and look at the arrow showing
the cover to be opened).
To lift off the cover, open the four camlocks
(4) by half a turn, lift off the cover and
unhook the safety lanyard. Now open the
two knurled screws (5) and remove the
gobo insert. The following figure (1) shows
the gobo insert of the P18 MK2 Wash.
To change the gobos, remove the clamping ring A (Figure
(2) - rotating gobos. Then you can replace the gobo and
replace the ring. When inserting glass gobos, make sure
that the coated side is facing the lens.
7.3 Gobo size
If you want to have your own gobos produced, please note the following dimensions:
Usable diameter, rotating. Gobos: 28.00 mm
Outer diameter: 33.90 mm (+0/-0.2 mm)
Maximum thickness: 1.1 mm
28mm 33.9 mm
(1)
5
2 2
3 3
4
1 1
(2)
A