background image

2

WARNINGS & PRECAUTIONS

Important Safety Instructions:

- Read and follow all instructions.

- Keep these instructions for future reference.

- Heed all Warnings.

- Intended for children age 8 and higher. Adult 

supervision is required.

- Only use attachments/accessories specified by 

the manufacturer.

- Before flying, always check the body, rotors, and 

battery for any damage or obstructions.

- Battery should be free from cracks or swelling.

- Keep the rotors clear of any obstructions and 

body parts to avoid potential damage and injury.

- Manufacturer and dealer assume no liability for 

accidental damages from improper use or 

installation of parts, or from damage incurred from 

worn or broken parts.

- Pilots are responsible for their actions and any 

damage caused by improper use.

- Pilots should keep the craft in sight at  all  times 

during a flight If you lose sight of the craft at any 

time, power down and cease flight immediately.

- Fly only in large, open areas that are free from 

obstacles or potential hazards, such as trees, 

power lines, ceiling fans, and the like.

- Flying over bodies of water is not recommended.

- Flying at night is not recommended.

- Never try to retrieve the craft from areas you 

cannot safely reach, such as rooftops or trees.

- Never launch the craft from your hand.

- Never leave the craft unattended while it is 

powered on or while the battery is charging.

Add FCC ID: YNIJAZWARES121

FCC Warnings:

Warning:

 Changes or modifications to this unit 

not expressly approved by the party responsible 

for compliance could void the user’s authority to 

operate the equipment.

NOTE:

 This equipment has been tested and 

found to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable 

protection against harmful interference in a 

residential installation. This equipment generates, 

uses, and can radiate radio frequency energy 

and, if not installed and used in accordance with 

the instructions, may cause harmful interference 

to radio communications. However, there is no 

guarantee that interference will not occur in a 

particular installation. If this equipment does 

cause harmful interference to radio or television 

reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try 

to correct the interference by one or more of the 

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment 

and receiver.

- Connect the equipment into an outlet on a circuit 

different from that to which the receiver is 

connected.

- Consult the dealer or an experienced radio/TV 

technician for help.

Additional Warnings & Precautions:

WARNING:

 To reduce the risk of or electric shock, 

do not expose this apparatus to rain, moisture, 

dripping, or splashing.

CAUTION: 

Use of controls or adjustments or 

performance of procedures other than those 

specified may result in personal injury.

WARNING:

 Changes or modifications to this unit 

not expressly approved by the party responsible for 

compliance could void the user’s authority to 

operate the equipment.

CAUTION:

 Danger of explosion if the battery is 

incorrectly replaced. Replace only with the same or 

equivalent type.

- Lithium batteries, like all rechargeable batteries, 

are recyclable and should be recycled or disposed 

of according to state and local guidelines. They 

should never be disposed of in normal household 

waste, and they should never be incinerated, as 

they might explode. Contact your local government 

for disposal or recycling practices in your area.

WARNING:

 Shock hazard - Do Not Open.

- Battery shall not be exposed to excessive heat 

such as sunshine, or the like.

- Keep new and used batteries away from children. 

If the battery compartment does not close securely, 

stop using the product and keep it away from 

children.

- If you think batteries might have been swallowed 

or placed inside any part of the body, seek 

immediate medical attention.

- Do not mix old and new batteries.

- Completely replace all old batteries with new ones.

- Do not mix alkaline, standard (carbon-zinc), or 

rechargeable (ni-cad, ni-mh, etc.) batteries.

- Batteries should be recycled or disposed of as per 

state and local guidelines.

Содержание FORTNITE CLOUDSTRIKE GLIDER DRONE












Отзывы: