WWW.JAYS-AUDIO.COM
Page
3
of
10
INTRODUCTION
Jay’s Audio products are built with performance and durability in mind. Each product is
tested carefully with Audio Precision APX525 before shipping. Careful installation of the
product will ensure the correct performance and ensure the product is at its full potential.
PACKAGE CONTENTS
1.
AC Mains Power Cord
2.
Disc Clamp
3.
Gloves
4.
Remote Control Unit
5.
Spare Fuse
6.
CDT2-MK2
UNPACKING
The CDT is shipped with sturdy double boxes. Please keep the box should you need to
transport the unit to another location.
Carefully unpackage the CDT, place it on a stable surface, i.e. HiFi Rack. You may wish to use
the gloves provided while handling the CDT.
Peel off the transparent green tape of which was used to factory sealed the top loading
slider lid.
Slide open the top loading lid, located the protective foams inside. The protective foams
were intentionally stuck in between the CDM4/19 laser assembly space to prevent the
potentially erratic movement of the laser during transit. Remove the protective foams
completely.
