WWW.JAYS-AUDIO.COM
Page
7
of
10
Playback
Turn on the rear power switch. After about 5 seconds of spinning the disc, the CDT
automatically enters power-on state, and the OLED display flashes “READ” indicating that
the disk information is being read.
After the disc information is correctly retrieved, the disc information’s will be displayed. For
example, "18 84:18". At this point, the CDT is in normal operation.
Hit the Play button on the front panel to start playing the tracks.
Change Disc
It is recommended to stop playing the current disc before changing the disc. This allow the
CDM4 mechanism motor to stop spinning gradually. Press Stop button on the front panel to
stop playing the current disc.
Slide the top loading lid towards the rear of the unit fully. Retrieve the Disc Clamp and Disc
gently. Follow the same steps stated in Disc Loading above.
