Jayco Precept 2018, Руководство пользователя, Страница: 74 / 169

72
Section 5: Slideout Systems
unit (or use a ratchet to actuate the motor) to pull the room in or out.
If the motor is
functioning, check the room for obstructions.
Norco Slideout Manual Operation
1.
Locate the included flexible shaft in your
owner’s packet.
2.
Attach flexible shaft to the 1/4” hex fitting
on the end of the motor.
3. Attach 1/4” socket & ratchet, or drill to the
other end, and turn in the proper direction
to move the room.
4. If the cables tighten, and the motor
is difficult to turn, REVERSE THE
DIRECTION.
OVER-TORQUEING
CAN HAPPEN, RESULTING IN
SEVERE DAMAGE.
Power Gear Slideout System
Manual Override
- The slideout system is
equipped with a manual override that allows you to extend or retract the room in the event
of a loss of power.
Always disconnect battery from system prior to manually operating
system. Failure to disconnect battery can cause electricity to back feed
through the motor and cause serious damage to the system as well as void
the warranty
Use EXTREME CAUTION when extending/retracting the room
using the manual override feature
. The gears can be stripped out if the
room is manually retracted/extended to its fullest extent and the operator
continues to rotate manual override. Damage can also occur to the slide
components, slide room structure or trim components. Damages due to
misuse of the manual override feature will void any and all claims to the
Limited Warranty.

Table of Contents Maintenance Record