![background image](http://html1.mh-extra.com/html/jayco/melbourne/melbourne_owners-manual_3655910023.webp)
Y
our RV
contains separate low voltage
(12-volt DC) and high voltage (120-volt AC)
electrical systems. Because the wiring and
circuitry is a dedicated system specific to your
motorhome, we recommend you do not make
unauthorized changes or add fixed appliances
yourself. Only a qualified electrical dealer
technician should attempt to make changes or
additions to the electrical system. Approved
materials, components and methods of
installation must be used to meet safety and
code requirements.
Any changes or
additions made to your RV may result in a
hazardous condition.
To read more about the various components
incorporated into the RV electrical system,
please refer to the information contained in
your Owner's Portfolio. Consult the Chassis
Guide for information pertaining to the chassis
electrical system.
E
LECTRICAL
S
YSTEM
P
RECAUTIONS
Careless handling of electrical components
can be fatal. Always take the appropriate
safety precautions when working around the
electrical system.
0
Use caution when using metal tools. If a
tool contacts a battery terminal or metal
connected to it, a short circuit could occur
which could cause personal injury,
explosion or fire.
0
Remove your rings, metal watchbands
and any other metal jewelry before
working around the electrical system.
0
Never touch or use electrical components
with bare feet, wet hands or while standing
in water or on wet ground.
0
NEVER
allow children to play with the
electrical system or components.
Always make sure the inverter is turned OFF
before disconnecting the batteries. Always
disconnect the power cord, chassis battery
negative battery and house battery negative
cable before working around the RV electrical
systems.
I
N
C
ASE
O
F
A
N
E
LECTRICAL
F
IRE
1. Have everyone (including pets) evacuate
your RV immediately.
2. After everyone is clear and accounted for,
if possible:
a. Turn OFF the battery disconnect
switch.
b. Disconnect the power cord from the
external power source.
c. Disconnect the house battery cables.
d. Turn OFF the generator.
3. Check the fire to see if you can attempt to
put it out with the fire extinguisher. If there
is any doubt, call the local Fire Department
for emergency assistance.
4. Do not touch any electrical wires or
appliances.
If you feel the fire was caused by a product
failure you must contact Jayco Customer
Service at (574) 825-0608 for approval before
you clean any debris, enter, move or repair the
RV (failure to notify Jayco may result in loss of
coverage). Otherwise, when the fire is out
clean up the area as soon as possible. Always
have faulty or damaged wiring and electrical
components repaired before using your RV
again.
120-VOLT AC SYSTEM
19
SECTION 3
ELECTRICAL SYSTEMS
WARNING
Do not
attempt to use water to put out an
electrical fire. Water can spread some
types of fire, and electrocution is possible
with an electrical fire.
WARNING
Make very certain the external power
source (30-amp systems only) you connect
the power cord to is rated for
120-volt AC
and not 240 volt AC.
Содержание MELBOURNE
