Jayco Heritage, Руководство пользователя

Страница: 38 / 87

29
OPERATION
Flushing
10. In order to prevent overpressure at high temperatures or
difference in heights, open and close the valve blade once
before use. Then add water to the bowl by turning the flush
knob in a clockwise direction. When flush knob is released
it will automatically turn back.
11. To flush after use, turn the valve knob counterclockwise and
turn the flush knob. This procedure results in the best bowl
rinse and most efficient use of water. After flushing, turn the
knob clockwise to close the valve blade. The toilet can also
be used with the valve blade open, which allows the waste
to go directly into the holding tank.
Emptying the Cassette
The cassette capacity is 5.3 gallons and should be emptied when
the waste level gauge indicator goes from green to full red. The
gauge does not begin to move from green to red until tank is over
3/4 full.
CAUTION: Do not allow cassette to become overfilled,
see trouble shooting section for emergency emptying proce-
dure. To empty cassette be sure that valve blade is in closed
position.
12. Open the access door on the outside of the camper and
remove the cassette tank by pressing the retaining clip.
13. Carry cassette using lower carrying handle, pour-out spout
up, to a normal household type toilet or other authorized
disposal point. Set cassette in vertical position on ground
and rotate pour-out spout upward.
14. Remove spout cap. Grasp unit by upper carrying handle
nearest to pour-out spout. Place other hand on upper rear
grip so that the air relief valve button can be depressed with
thumb while emptying, to insure smooth outflow of tank
contents. When empty, remove the sliding cover manually
by sliding it towards the pour-out spout, rinse tank and
valve blade area with water.
NOTE: Depress air release
valve button only when pour-out spout is pointed down-
wards.
15. If necessary, make the toilet ready for use (see #1-7). Slide
cassette into the toilet and lock the access door.