Jayco Eagle FW 2021, Руководство пользователя

Страница: 52 / 211

Section 4: Vehicle Operation
50
Auto Leveling Control Touch Pad
A
- Red/Green LED indicates system status
B
- Up Arrow extends front jacks (landing gear)
C
- Down Arrow retracts front jacks (landing
gear)
D - Auto Level button places system in the auto
level mode
E
- Hitch Height button initiates the Hitch Rec-
ognition feature
F
- Retract All button puts leveling system in
full retract mode.
Auto Level Touchpad LED Indicator status
OFF -
Touch pad is locked
Solid Green -
Touch pad is active
Blinking Green -
Jacks are moving
Solid Red -
Low battery
Blinking Red - Error
The OneControl touch screen or Leveling App will show the specific error.
Refer to troubleshooting section of the LCI Ground Control 3.0 manual to clear the error.
Auto Leveling Touch Pad
Unhitching the RV
1. Before unhitching from the tow vehicle, ensure the RV is parked on a level surface and
tires are chocked.
2. Extend the inner legs of both landing gear (front jacks) to within 4”- 5” of the ground
by pulling on the quick release pins.
3. Turn on the touchpad by pressing both arrow buttons simultaneously. LED illuminates
solid green.
4. Press the UP arrow button to extend the front jacks to lift the front of the RV taking
weight off the hitch.
5. Uncouple the RV connection to the tow vehicle. Pull tow vehicle away.
Auto Leveling
1. Turn on the touchpad.
2. LED will light up solid green.
3. Select AUTO LEVEL and the auto leveling process begins. Front of the RV will seek
a position near level. Rear jacks will be grounded (on 4 point system). Side to side
leveling will begin.
NOTE: When the leveling cycle has started, it is important there is no
movement inside the RV until leveling is complete. Failure to remain still
during leveling could affect the performance of the leveling system.
NOTE: Refer to the Lippert Ground Control 3.0 manual included in our
warranty packet for complete instructions on the following procedures.