Jayco Eagle FW 2021, Руководство пользователя

Страница: 192 / 211

Section 12: Interior
190
MAKE SURE THE SAFETY STRAPS AT EACH SIDE
OF THE FOOTBOARD ARE ATTACHED TO THE
STEEL LOOPS ON THE SOFA ARMS BEFORE PUT-
TING ANY WEIGHT ON THE BED.
The label shown here is located next to the slide out controls
inside the entrance door.
It should not be removed.
Remove the straps holding the mattress to the bed frame by
unsnapping the two plastic buckles on top of the mattress.
These straps can be stored on the side of the mattress, or
tucked between the headboard and the mattress. Release the
mattress hook from the foot of the bed.
Storing The Murphy Bed

Attach the “Y” strap that holds the mattress to the bed-
frame. Pull the straps with the buckles up from the
head of the bed and snap them to the “Y” strap. Secure
the snap hook at the footboard.
MAKE SURE THE
SAFETY STRAPS AT EACH SIDE OF THE FOOT-
BOARD ARE STILL ATTACHED TO THE STEEL
LOOPS ON THE SOFA ARMS BEFORE PUTTING
ANY WEIGHT ON THE BED.

Unhook the safety strap snap hooks from the steel loops on
the arms of the sofa.

Release the locking lever (if applicable) so bed can be
raised.

Push the bed back up into the storage position.
Snap hooks (if present) must be attached to the steel rings on the sofa
arms before using the bed.
Failure to attach these snap hooks to the steel
loops on the sofa can result in serious injury or property damage.

NOTE: On some models, the Murphy bed may lock in place when
lowered to keep it from flipping up unexpectedly. In order to release the
bed, a lever must be pulled first. There are two types of levers. One is a
“T” handle installed in the side dresser and the other is a lever built into the
side of the couch. When the lever is pulled, the bed can be returned to the
folded or stored position. Make sure to latch the sliding “D” bolts on each
side when bed is returned to the upright stored position.