Jayco 2016 Melbourne, Руководство пользователя

Страница: 50 / 169

40
v
ehicle
O
peratiOn
Adjust the outside rearview mirrors before driving.

The rear vision camera aids in the use of, but does not replace vehicle side/
rear-view mirrors

o
utside
r
eArvieW
M
irrors
After adjusting the front driver’s seat, adjust the outside rearview mirrors to your driving
preference. Have someone help you adjust the mirrors in the desired direction for maximum
rear visibility before driving. During travel, vibration may loosen the fitting holding the
mirror(s), causing them to change position. As part of your regular motor home maintenance,
check and adjust the mirrors to the desired position.
Power remote mirrors (if so equipped)
You can adjust the power remote mirrors when the ignition key is in the ON position.
1. Move the control knob to the side you want to adjust.
2. Press the control arrows in the direction you want the mirror to move.
3. Return the control knob to the center to lock the mirror(s) into place.
The power remote mirrors also contain heating elements to defog or de-ice the mirrored
glass if needed. To activate this feature, use the “Mirror Heat” control located on the driver’s
side console next to the mirror control.
r
eAr
v
ision
c
AMerA
Your motor home is equipped with a rear vision monitor that gives a limited televised view
of what is behind your motor home. The rear vision camera will aid you in backing up the
motor home, and can be used for a greater field of vision when driving in heavy traffic.
In addition to the rear vision camera, your RV may be equipped with side view cameras as
well. These will be mounted on each side of the RV facing rearward to give you views down
each side of the motor home.
Check the outside rear view mirrors when driving and backing up the motor home for a more
complete field of vision.
Objects in the camera/monitor view can be closer than they appear. To become accustomed
to using the rear view camera monitor, practice backing up in a safe place. If in doubt, ask
another person outside the vehicle to assist.
The monitor is operational whenever the engine is running. To use the monitor, flip the
switch from standby to ON (the monitor will also work when with the motor home is in
“reverse” and the monitor in standby).
Make sure you turn the monitor to standby while
driving to avoid being distracted.
Never operate the rear vision monitor in the ON position for extended periods of time as this
may result in an “image burn” on the monitor.
For detailed operating and safety information, refer to the manufacturers user guide.