Jayco 2016 Melbourne, Руководство пользователя

Страница: 144 / 169

134
i
nteriOr
To remove stuck on dust or stains refer to the following guide.
Solar shields: Use a sponge or soft brush and water to remove stains. A mild cleaning
solution can be used to remove tougher stains. Rinse after cleaning by wetting a clean cloth
in fresh water, wringing our any excess and wiping the areas where the cleaner was used.
Day/night Shades : Clean with a mild cleaning solution using a sponge or paper towel.
Wipe down with water after cleaning and dry thoroughly before raising the shade. Do not
use spot remover, household cleaners or detergents to remove soiled spots, as these may
cause damage to fabric or loss of color from fading.
Mini Blinds: A simple dry rag may do the trick. If they’re especially dirty, you can use cold
or warm water to clean them. But never use hot water.
Fill a spray bottle with water and a tiny amount of soap. Then spray a lint-free towel with
the mixture and use the towel to wipe down each slat. While cleaning, try not to bend the
slats. They can also be soaked in a bathtub to loosen up any debris so the slats can be wiped
down easily.
Roller Shades: Can be easily cared for by simply using soapy water or a mild cleaning
solution on spots. However try a small area first. Harsh household cleaners or detergents
may cause damage to fabric or loss of color. It is our recommendation to dust the rails and
fabrics of the shades on a regular basis. Shades should be kept in the closed or up position
when not in use, to maintain pleat retention and minimize dirt and soil build-up. Do not store
shades in the down position. This may cause some loss of pleat retention if the shades are
not operated on a consistent basis.
NOTE:
If your recreation vehicle must be stored for an extended
period of time, store shades in the up position and cover your win-
dows with additional protection (I.E. Cut out cardboard).
s
ofA
Your motor home may be equipped with one of the following sofa styles.
Hide-a-bed Sofa or Sofa Sleeper
The hide-a-bed sofa functions much the same as a regular residential hide-a-bed sofa.
To make the hide-a-bed sofa into a bed, remove the seat cushions and pull the sofa back
towards you firmly and gently. Activate (or deflate) the air mattress (if so equipped) using
the supplied furniture manufacturer’s instructions. To convert the hide-a-bed back into the
upright sofa position, reverse the process.
Jack Knife Sofa
The Jack Knife sofa functions much the same as a residential futon. To make the sofa in to
a bed, lift up on the bottom seat cushion and pull it towards you. The sofa back will drop
down to provide a sleeping surface. For additional comfort and to reduce fabric damage,
Always use seatbelts if sitting in the sofa while the motor home is in transit.
