Connecting:
(1)
If using the Par lights separately, each High Power LED Par 64 need to plug the power cable into correct power
input required, if need to use DMX console to control the Par lights, please connect the DMX console with DMX
cables.
(2)
If many sets of High Power LED Par 64 lights are used together, each High Power LED Par 64 need to plug the
power cable into correct power input required, please connect these High Power LED Par 64 lights with the
DMX cable. If need to use DMX console to control them , please connect one of the High Power LED Par 64
light to the DMX console with DMX cable; and do the settings as DMX mode required as this user manual
instructed.
Set Up
Power Supply: Before plugging your unit in, be sure the source voltage in your area matches the required voltage
for your High Power LED Par 64 Light. The High Power LED Par 64 is AC 240V use. Because line voltage may vary
from venue to venue, you should be sure your unit voltage matches the wall outlet voltage before attempting to
operate you unit.
DMX Linking: To ensure proper DMX data transmission, when using several DMX units try to use the shortest
cable path possible. The order in which units are connected in a DMX line does not influence the DMX addressing.
For example; a unit assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the
end, or anywhere in the middle. When a unit is assigned a DMX address of 1, the DMX controller knows to send
DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain.
Operating Instructions
Operating Modes: You can use the LED Par 64 light in 6 ways
，
please select the mode through pressing the
following buttons
：
ENTER UP DOWN ESC
SOUN (Sound-Active mode )– this unit will react to sound when under this mode; please press UP and DOWN
button until it shows the SOUN
，
please press ENTER to choose 2 type of sound mode
：
SOU1 and
SOU2
，
SOU1 is function for sound active for white strobe
（
RGB mixed
），
press ENTER if you choose this
mode
，
and there are 13 degrees sound sensitivity for your choices
：
S100-S112, (please note S100 is for no
Sound-Active); SOU2 is function for sound active for color change
；
press ENTER if you choose this
mode
，
and there are13 degrees sound sensitivity for your choices
：
S200-S212, (please note S200 is for no
Sound-Active);
FLAS (Strobe Mode), press ENTER to choose this function, this unit will automatically strobe; under this mode,
press ENTER to choose RGB color strobe please select: Frgb, and F001-F012 is for strobe speed choices;
then press ENTER to choose RGB each color brightness: Fr00-Fr12 is for from 0-100% RED BRIGHTNESS
choice; Fg00-Fg12 is for from 0-100% GREEN BRIGHTNESS choice; Fb00-Fb12 is for from 0-100% BLUE
BRIGHTNESS choice;
FLO-(Color Fade Flowing Mode), press ENTER to choose this function, this unit will automatically fade, to
choose fade speed please select from : F001-F012
CHAS (Color chase Mode), press ENTER to choose this function, this unit will automatically jump seven colors
in sequence of: RED, GREEN, BLUE,ORANGE, CYAN, PURPLE,WHITE ; to choose color jump speed please
select from : C001-C012
LrGb (Manual Mode), press ENTER to choose this function, this is for operator to adjust the R G B brightness
manually, Lr00-Lr12 is for from 0-100% RED BRIGHTNESS choice; LG00-LG12 is for from 0-100% GREEN
BRIGHTNESS choice; Lb00-Lb12 is for from 0-100% BLUE BRIGHTNESS choice;
2
/
4
