Touch Buttons
There four touch buttons under the Digital display displays: ENTER UP DOWN ESC
Press ENTER to choose the run modes; Press Up/Down to scroll in the menu or submenu options; Press Enter to
confirm your selection or to switch between two submenus. Any time press and hold Up or Down, the value will
rapidly change and stop when release. Once the value is set, it will be automatically saved; press ESC to exit.
Cleaning
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out
periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3.
Always be sure to dry all Parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue, dust, dew).
Trouble Shooting
Listed below are solutions for a few common problems the user may encounter.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are wired correctly. Also, check that all cables are
connected to the right connectors; it does matter which way the inputs and outputs are connected.
Unit does not respond to sound:
Quiet or Low pitched sounds will not activate the unit. If problems are not resolved, contact your dealer for service.
Note: All information is subject to change without prior notice.
4
/
4
