2
CAMERA INSTALLATION
1. Carefully unpack the camera.
2. Mount the stand of camera to the wall:
• Mark the position of the screw holes on the wall.
• Drill holes and insert the drywall plugs as needed.
• Firmly attach the stand to the wall using the provided screws.
3. Attach the antenna to the camera prior to mounting.
4. Place the camera in the desired mounting position. Tighten the
thumbscrews to secure the camera to the Stand. Adjust the angle of
the camera until the desired view is set.
Camera installation is now completed.
CONNECTION
Solar panel installation
1. Unpack the solar panel.
2. Decide where the solar panel to be installed. The location for solar panel installation should have
sufficient sun light to ensure the camera is powered perfectly. Then mount the solar panel to the position
with supplied screws.
Notes
: You can rotate the solar panel to make it be irradiated by the sun light straightly.
Connecting the camera, battery pack and solar panel
The power cable of rechargeable battery pack is 20” only, so the battery should be located near the
camera. To connect the camera, battery pack and solar panel, there are two options:
- When solar panel is installed far away from the camera, use the supplied 10m cable for the connection.
1). Connect one end of the cable to the solar panel.
2). Connect the other end of the cable to the battery pack.
3). Plug the power output cable of battery pack to the power input jack of the camera.
