Charging status indication
The LED in the bottom of the rechargeable battery pack indicates the charging status:
Red LED on: Charging
Green LED on: Full charging
Red LED flash: Charging fault
Camera Overview
Before operating the camera, have overview about all
parts of the camera.
Front & Side Control
1. Camera Antenna
– Sends signals to the receiver.
2. AC Adaptor Jack
– Plug the AC adaptor (not
included) to the jack for camera’s power supply.
3. Wall Mounting Bracket
– Use the bracket to
mount the camera on a wall or other flat surfaces.
4. IR LEDs
– Infrared LEDs provide viewing in no/low
light conditions
5. Lens
– Catches the video in front of the lens and
transmits video from camera to receiver.
6. PIR Sensor
– Detects motion in front of the lens
and emits detection signal to transmitter.
Bottom Control
7. Microphone
– Receives sounds from the area near
the camera, and transmits sound from the camera to
the receiver.
Back Control
8. Pair Button
– The pair button is located on the
back of the camera, it is used to pair the camera with
receiver.
4
