LA-5172 Wireless Door Announcer
"+"
极
"-"
极
"+"
极
"-"
极
+VE
-VE
Installing Your System
In choosing a suitable location you should bear in mind:
•
The need to reach the door announcer and PIR easily for turning the unit on
or off and if the batteries need replacing.
•
The door announcer should not be visible from the exterior of the protected
premises.
Reception of radio signals can be affected by the presence of metal objects within a
few metres of the door announcer. (E.g. mirrors, central heating, garage doors and
cars parked in garages on the opposite side of the wall. Avoid any location which is
near (within 60cm) to these or any other large metal objects.
Installation
Wireless Door Announcer
CAUTION:
When positioning the door announcer ensure that it is located in a dry
place away from damp areas.
Step 1:
Unscrew and retain the holding screw from the
front cover. Remove the front cover(s) from the base
assembly.
Step 2
: Place 4 x 1.5V “D-Cell” Alkaline batteries
(not included) inside the battery compartment
with correct polarity.
Step 3
: Close the front cover and screw up. Turn
on the unit and two short ”beeps” are heard, the
unit is now operational. Place the unit in a suitable
location according to your needs.
ON
O
FF
On /Off Slide Switch
