operation will still be possible. However, after other operation of device, camera will resume auto focus.
Iris operation:
press OPEN and the iris will enlarge and image brightness will increase. Press CLOSE and the
iris will gradually shrink that leads to brightness decrease. Under automatic iris mode, both OPEN and CLOSE
buttons are still valid. However, after other operation on dome, camera will resume automatic iris motion.
Preset point operation:
Preset point can be set or called through keyboard, DVR font panel. For example, press “Preset”, a numeric key,
“Enter” in order on the keyboard to call a preset. Preset 51 to preset 101 are special presets, please refer to
section 3.3.
The analog speed dome supports 104 presets, 70 presets using Manchester code protocol. The presets that can
be defined is related to the control system. Please refer to the control system manual.
Using keyboard or DVR’s front panel can call preset. Take analog camera for example. When use keyboard to
call preset, please orderly press the “call preset” + three numbers, “entry”; 50
th
~ 104
th
is used for special preset
and is reserved. Refer to chapter 3.3.
3.3 Preset points functions
3.3.1 Analog speed dome special preset function
Analog integrated speed dome can only be operated by preset, and all the operations are realized by calling or
setting a preset. The functions of preset point in detail are given as follow Figure 3.3 and Figure 3.4.
1.
Using HIKVISION, PELCO-D, PELCO-P protocols, the preset and corresponding function are as below:
Presets Operation
Call the preset
Set the preset
1 to 50
Call functions
Set functions
51(No.1 auto scan path)
Start auto scan(high speed)
Set auto scan starting position
52
Start auto scan(medium speed)
Set auto scan end position
53
Start auto scan(low speed)
---
54
Reboot
Restore to factory settings
55
Close camera auto restore
Open camera auto restore
56(No.1 patrol)
Start patrol (high speed)
Set the patrol to stop for 10
seconds
57
Start patrol (medium speed)
Set the patrol to stop for 30
seconds
58
Start patrol (low speed)
Set the patrol to stop for 60
seconds
59
Start Sens Up(for SONY camera )
Close Sens Up(for SONY camera)
60
Auto focus
Half-auto focus
61
Open park action
Auto park action 10s
62
Close park action
Auto park action 30s
63
Preset 1
Auto park action 60s
64
Preset 2
Auto park action 300s
65 Preset
3
Zoom
Trigger
focus
13
